Learn how to remove fence post concrete with ease with just one tool (and no, it's not a jackhammer or shovel!)
When we bought our house, one of the first things we did was replace the old, rotting deck. The new stairs were in a different configuration, and the contractor left this lovely concrete footer in the ground from the old stairs.
I can't tell you how many times I've tripped over that metal piece sticking out into the sidewalk! 😡 I put off dealing with it for years, but now I'm building an enclosed bike shed in this spot, and the footer is in the way.
I originally thought I would just work around it, but the metal part is still an issue. I just need to suck it up and pull it out!
Luckily, it turned out to be a LOT easier than I expected! All you need is the right tool to remove concrete posts in minutes. Here's how!
This post contains affiliate links for your convenience. Purchases made through these links may earn me a small commission at no additional cost to you. Please visit my disclosures page for more information.
Rent or buy a farm jack
All you need to remove fence post concrete is a high lift farm jack and a short length of tow chain or strap. I was planning to buy this one from Harbor Freight, then immediately sell it on Craigslist or Facebook Marketplace when I was done.
Then I remembered that our neighborhood has an amazing tool library where you can rent equipment like this for just a few dollars! I was able to pick up this EXACT farm jack, plus a chain, for a whopping $8.
Just Google "tool library" and your zipcode to see if there's one near you!
Remove soil from the top of the concrete
Ok, so maybe there's a little bit of digging involved here, but not much! Just remove enough of the soil so you uncover the top of the concrete. This will make it easier to see what you're working with.
If you don't have a metal part of the post like I do, you'll have to dig a little further to find where the concrete narrows. This will give you something to wrap the chain around without it slipping off.
Wrap the chain
Once you've located a good spot to pull from, wrap the tow chain around it, leaving some length at the tail end with the hook.
Place the jack right next to the post concrete. If you're working on soft ground, you may want to place it on a board that will distribute the load better and won't sink down.
Wrap the end of the chain around the jack, and secure it in place with the hook through one of the links. Raise the jack up a few clicks until the chain is taut.
Ratchet the jack up to remove the concrete
I'll admit, I was a little nervous/doubtful that this would work. But after a few pulls on the jack handle, I could start to see some movement!
As the load increased, the jack started to tip forward. Keep one foot on the base to keep it upright.
It only took a few more pulls to pop the entire thing out! I can't believe how easy it was (and how shallow that concrete footer was, yikes!)
The area under the stairs will be closed up once the bike shed is installed, so I just rolled the concrete in there. Now I could make a level base for the shed, without having to work around that stupid pillar!
I hope this tutorial helped save you from the back-breaking work of digging out fence post concrete by hand! It was so much easier to lift it out this way, and you could get an entire line of them done in a fraction of the time and effort!
